A Garage Floor That Works as Hard as You Do.
A coated concrete floor is a smart investment — durable, easy to maintain, fully customizable and a real boost to your home's value and curb appeal. From high-gloss epoxy to decorative flake systems, we transform tired slabs into showroom-quality surfaces that resist water, chemicals and abrasion.
- Chemical, oil and stain-resistant finish
- High-gloss, showroom-quality look
- Decorative flake, metallic and solid-color systems
- Slip-resistant topcoat options
- Bonded prep — no peeling or flaking
- Cracks and pitting repaired first
Get a Fast, Free Estimate
Tell us about your project — reply within 1 business hour.
Why a coated floor is worth it.
Built to Take Abuse
The right coating system stands up to hot tires, dropped tools, oil drips and everyday wear that ruins bare concrete.
Stunning Finish
From soft metallics to bold flake blends and solid colors, you get a high-end look you can't get from paint or sealer.
Easy to Live With
Spills wipe clean. No dust, no staining, no re-sealing every year — a quick rinse or mop is all it takes.
A simple path from quote to finished floor.
- 01Design & Quote
We measure your space, inspect the slab, choose a color system and quote the job clearly on-site.
- 02Concrete Prep
The slab is mechanically profiled and any cracks or pitting are repaired so the coating bonds for good.
- 03Base + Color Coats
Base coat, color flake or metallic pigments are applied in sequence to your design.
- 04Protective Topcoat
A tough, high-gloss topcoat locks everything in and delivers the final shine. Foot traffic returns the next day.
The complete guide to garage floor coatings in Northeast Georgia
Why bare garage concrete fails in Georgia
Bare concrete is porous. It soaks up oil, antifreeze, red clay and pollen, and it dusts as the surface wears. Humid summers draw moisture through the slab, and hot tires coming off I-85 and I-985 grind grit into it every day. Within a few years, most bare garage floors around Buford look stained and tired even though they're structurally fine.
A professional coating seals that porous surface under a thick, non-porous layer. Spills sit on top, dirt rinses off, and the floor looks the same year after year. It's part of our broader epoxy floor coatings specialty.
Choosing a system for your garage
Most homeowners choose a full-broadcast flake floor with a polyaspartic topcoat — the best mix of looks, grip, dirt-hiding and UV stability. Showroom garages often go metallic. Workshops may prefer a clean solid color.
Base and topcoat chemistry
We use epoxy for bond and build and a UV-stable polyaspartic topcoat for abrasion and sun resistance. Read epoxy vs. polyaspartic to see why.
Decorative finish
Flake hides dirt and adds texture; metallic is a showpiece. Compare them in flake vs. metallic epoxy floors.
Is a coating right for your garage?
A coating is a great fit if you check any of these boxes:
- ▸Oil spots, tire marks or stains that won't wash out
- ▸Dusting concrete or light pitting
- ▸A peeling DIY kit you want done right
- ▸You use the garage as a gym, shop or extra living space
- ▸You're preparing to sell and want a clean, finished look
What drives the price
Size, slab condition, the system you choose and extras like steps or cove base. Removing an old coating adds time. The garage floor coating cost guide covers every factor and what to ask when comparing quotes. After install, the maintenance guide keeps it looking new.
Real jobs. Real finish.
How long will a coated floor last?+
With proper prep and a quality coating system, expect many years of hard-working service before any refresh is needed.
Can you fix cracks and pitting?+
Yes — crack and spall repair is part of our standard prep, not an upsell.
Is the finish slippery when wet?+
We can add a slip-resistant additive to the topcoat to keep the floor safe in wet conditions.
Where can these coatings be installed?+
Garages, shops, patios, commercial kitchens, showrooms and more. Any sound concrete slab is a candidate.
How long does the project take?+
Most residential garages are completed in just a couple of days from prep to final coat.
Do you grind or acid-etch the concrete?+
We diamond-grind. It creates a much stronger bond than acid etching and removes weak surface concrete.
Will hot tires lift the coating?+
A properly bonded system with a polyaspartic topcoat is highly resistant to hot-tire pickup.
Can you coat over an old DIY kit?+
We grind off the failing coating completely first, then install a new professional system.
Do you coat basements and shops too?+
Yes — any sound interior slab, including basements, workshops, utility rooms and light commercial spaces.
Let's lock in your free, no-pressure estimate.
We'll visit your property, walk the project with you, and send a transparent written quote — usually the same day.
Request Your Free Estimate
Tell us about your project — a team member will contact you to schedule a time that's convenient for you.